data26-4 Groove processing and inner cutting in processing of back side |
data27-1 Grinding finish of resin t0.2 t0.5 t0.9 |
data-27-2 Plat thickness tolerance:0.01,Parallelism:0.002 or less. |
data26-1 Processing work (SUS 430):Finished in 1630×1700×t10 |
data26-2 Proocessing jig. |
data26-3 The dimensional difference of the intemediate process is 0.01 or less. |
data23 Rotary joint mounted on NC lathe. |
data24 Attach the comer to the photo on the left. |
data25 jig and work (black part) |
data20 Outer from cutting of rice cooker. |
data21 Inside of rice cooker. |
data22 NC lathe was converted to a special machine. |
data17 Digging of aluminum plate. |
date18 Digging of aluminum |
data19 Rice cooker |
data15-1 Gate type machining |
data15-2 |
data16 A5052: It opened 5148 through holes of φ0.35 at 683×829t8 |
data13-2 |
data13-3 |
data14 Back side of the jig |
data11 |
data12 |
data13-1 |
data9-1 |
data9-2 |
data10 |
data8-2 Left jig and the work, cut on the right side. |
data8-3 Left jig and the work, cut on the right side. |
data8-4 We used Rotary joint on a NC lathe. |
 |
data7 The one shown above is a cigarette. Lft jig. right work |
data8-1 Left jig and the work, cut on the right side. |
data6-1 |
data6-2 |
data6-3 |
data5-3 |
data5-4 |
data5-5 |
data4-3 |
data5-1 |
data5-2 |
data3-2 |
data4-1 |
data4-2 |
data2-2 |
data2-3 |
data3-1 |
data-1-1
|
data1-2 |
data2-2 |